Category Archives: Uncategorized

Time align or sync your video and audio in OBS

In this video I’ll show you one method for time aligning your audio and video in OBS.  If you use a different hardware interface to bring in your audio and video, they will go through different drivers with different amounts of processing time – which can result in your audio and video being out of sync.  Use the method I show you in this video to get them back in sync!

 

 

 

 

Waves Discount Code: https://www.waves.com/r/jlb7kd
Single Camera Live Stream Diagram: http://bit.ly/2EQ2HNf
Multi Camera Live Stream Diagram: http://bit.ly/2IXOkJ4
Sync Test Video: http://bit.ly/2jCEqSz

EQUIPMENT LINKS
Recommended Video Interface: AJA u-tap https://amzn.to/2QJ3Pfp Recommended Audio Interface: https://amzn.to/2wiRh5t
Cheap USB Audio Interface: https://amzn.to/2KH0zvh Recommended Speakers to mix your live stream: https://amzn.to/2Prh6of

Make Your Own HD-SDI Video Cables

 

 

 

 

In this video I’ll show you how to make your own RG6 HD-SDI video cables using Kings 2065-2-9 connectors and RG6 1694a cable.

———————————————————–
EQUIPMENT LINKS
———————————————————–
Paladin RG6 Crimp Tool: https://amzn.to/2Qt5OS1
Paladin CST Wire Stripper: https://amzn.to/2OmKsEv
Heavy Duty Wire Cutter: https://amzn.to/2CWpNG1
BNC Connectors, Kings 2065-2-9 75 ohm: https://amzn.to/2xeT2hq
100ft RG6 1694a Cable: https://amzn.to/2CVwWqf
500ft RG6 1694a Cable: https://go.magik.ly/ml/fi3r/

———————————————————-
CONNECT WITH ME:
———————————————————–
Subscribe: http://www.youtube.com/subscription_center?add_user=makeradventures
Facebook: https://www.facebook.com/stephenballastmedia
Instagram: http://instagram.com/ballastmedia
*affiliate links

Watch Me Mix

This video is different from the kinds of videos I normally do on my channel, but people told me on my Facebook page that they would find this useful. This is just a raw GoPro shot of me mixing during our worship service this past weekend, and I’ve added some text commentary along with it to tell you what I’m doing and in some cases why. You may need to pause the video at times to read this because sometimes things happen faster than you’re going to be able to read it.

Something to note is that when you get to the actual event, and you’re mixing, that’s kind of like the icing on the cake, so I’m showing you the icing without showing you how I made the cake! Things like patching and routing the board, your stage setup, mic’ing, dialing in EQ’s and compressors, – all of that was done ahead of time and you won’t see that in this video.

You’re hearing the audio straight off the GoPro that I used to film this. So don’t expect to hear great sound, but I think it will give you enough context for what I’m doing.

A few things to look for…
1. Anticipating transitions.
2. Managing the low end – I’m pretty active in managing my low end and keeping it in a pocket that both adds intensity to the mix, but isn’t going to upset the older generation in our audience. Something I’m aware of and I think maybe has come with some maturity in my mix, is that I’m not mixing for myself, I’m mixing for the congregation that I’m serving.
3. Riding the vocals. You might not see much movement, but very small subtle movements on the vocal faders and mainly the vocal bus, I’m riding the vocal just on top of our congregation so they can be heard and lead without blowing out my dB limit. I do have a dB meter beside me that I use as a guide. I don’t have a hard limit, like “I can’t go above 95dB.” I have what I’d call checkpoints. In other words, is the dB level that I’m at appropriate for where we are in the service and what’s going on. Generally I try and stay around 85dBA slow, but there are times lower than that and times we’ll get louder when needed. I try and think about how the songs are going to ebb and flow during the service and my volume will as well.

CONNECT WITH ME:
Subscribe: http://www.youtube.com/subscription_center?add_user=makeradventures
Facebook: https://www.facebook.com/stephenballastmedia